Installation instructions

THE SWIVEL STAND

Through the following 6 steps, you’ll attach The Swivel Stand securely to your CANVAS speaker, ensuring a precise and seamless installation.

Parts in the box:

1 pcs. Round Steel Base
1 pcs. Support Column
1 pcs. Swivel Joint
1 pct. Mounting Bracket
2 pcs. Fixing Screws

Step 1 of 4

Stand Assembly

Attach the central pole to the round base.

Then mount the rotation and height adjustment module onto the pole, followed by the CANVAS mounting bracket at the top.

Important:

Before mounting the rotation module, ensure that the front rotation limiter screw on the central pole is tightened, so that it is flushed with the poles front.

If the screw is not flushed, the rotation module may not sit fully in place, which can affect stability and the front rotation limiter.

Tighten all screws firmly, ensuring they are secure without overtightening.

Step 2 of 4

Determining stand height

The stand features three preset height positions:

80 mm, 150 mm, and 230 mm

(measured from the floor to the bottom of the CANVAS).

Loosen the four locking screws on the central pole-bracket, adjust the stand to the desired height, and then tighten the screw securely to lock the position in place.

Screw the front rotation limiter screw out in the bracket, and test it blocks the bracket from turning more than 45°.

Step 3 of 4

Mounting CANVAS to the Stand

Insert the screws into the top two holes on the CANVAS. Do not fully tighten them. Leave them 8-10 mm out, as they need to remain slightly loose to fit over the mounting bracket.

Carefully lift and position CANVAS onto the stand, ensuring it is properly supported during the process. Align CANVAS with the two mounting holes on the stand, making sure it sits correctly before proceeding.

Once aligned, insert the rear two below screws and tighten them securely together with the two top screws to fix CANVAS in place. Ensure the unit is stable before continuing.

Congratulations!

You have now successfully installed the CANVAS onto your swivel Stand.